The front facet of this car is comprised of a range of curves. The bumper is dominated by the appearance of the four grilles. Above the front spoiler there are three grille sections all identical in height; the central section accounts for a third of the bumper's width. The largest of the four grilles is located centrally above the other three. The headlights are positioned in an impressed area of the front facet which also bulges out, they are outlined by two convex curves, however the outer can be divided into two curves. The lighting comes from two circular lamps and then an LED strip in the bottom area of the headlamp unit. Two-thirds of the bonnet/ hood width is accounted for by an elevated section a short distance behind the headlights. There is an impression either side of the elevated section that channels air into an intake.
The main body area is very linear; the main body line is straight and runs from level with the lower edge of the wheel-arch face to the level with upper edge of the rear wheel-arch face. The upper body line runs along from the top of the front flared wheel-arch through and beyond the rear flared arch, a small, black, ovular rear-view mirror rests on the point where this line meets the A-pillar. There is a retractable black soft-top that stores under a metal and fabric flip-up lid. There is an air vent parallel with the front wheel-arch curve just behind the front wheel-arch. At the point where the intake meets the main body line there is a small indicator lamp. At the bottom of the body the lower edges of the flared arches are connected by a ledge. The car features five-spoke alloys wrapped in low profile tyres.
The rear facet of this car has an aggressive design style. The rear lights sit an impressed section of the rear feacet, a short distance from the top. The rear lights are split into three sections, the top and bottom sections having red lighting, the middle section having orange lighting and closest to the centre, white lighting. The manufacturer logo in located centrally just below the impressed area's edge. On the rear bumper, parallel to the inner edges of the rear lights there is an impressed area where the license plate is mounted. Bloew this area three-quarters of the bumper width is occupied by a CFRP diffuser unit. Either side of this unit there are stacked twin-tipped exhaust tips located in vent, whose inner edges are parallel to the outer edges of the diffuser.
This car features high-ventilation brake rotors which are coupled to red, six-piston brake calipers.
- The convertible is seen in three colors in the trailer: red, white, and blue.
- The convertible is largely reminiscent of a 2010 Aston Martin V8 Vantage with some cosmetic differences. The front of the car was reminiscent to TVR Sagaris. with added Ferrari California grille and exhaust arrangement, while other parts of the car, such as the wheel wells, seem to come from a Nissan 370Z.