Fandom

GTA Wiki

Vehicle Features/Engines

< Vehicle Features

11,409pages on
this wiki
Add New Page
Talk30 Share

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.

Engines are vital machines found prominent in vehicles, which are used to convert energy from one form to another, usually by mechanical means. They are prominent in all Grand Theft Auto games, to an extent.

Description

Appearing in all Grand Theft Auto games, engines can be found under the bonnet/hood of almost every vehicle in the games.

3D Universe

Used as a smaller, realistic element, engines appear as minor textures. Because of their low quality, engine identification is minimal, however, prominent features of the engine, such as camshaft covers, the main engine block, and smaller details of manifolds can be seen. The engines are slightly more detailed in GTA: SA, appearing as partially-3D models instead of flat textures.

HD Universe

GTAV-Straight4-Engine

Using the Rockstar Editor, the player can see details inside the engine bay. Here, 4 inlet pipes are seen (left, rusty color), and 4 exhaust pipes are seen (right, dark gray), meaning this engine is a straight-4.

GTAV-V8-Engine

Again, using the Rockstar Editor, this engine can be identified as a V8, with another set of exhaust manifolds on the other side (not seen on this image).

Appearing in the HD Universe, engines return as a much more focused element. They can now be found as 3D Models, as well as textures. Engine identification can still be problematic, but with the support of 3D models, which can be seen even better with the Rockstar Editor in Grand Theft Auto V, engines can be identified much easier. Note that, especially in GTA V, the engine "cover" (which is the texture seen from looking under the bonnet/hood) can contradict the engine 3D Model, for example, the engine "cover" may be identified as a V8, however, the engine model may appear to be an Inline-4.

In Grand Theft Auto IV, engine models are often depicted with basic layouts such as Twin-cylinder, Inline-4 and V8 engines, with a few of them having their own layout (Sanchez with a single-cylinder engine). For Grand Theft Auto V, however, newer engine layouts and types were introduced, especially from DLC vehicles (Flat-4 engines like the Injection and V6 engines like the Tropos Rallye).

Types of Engines

Different engines appear in the GTA series, where some may seem a sensible choice for the vehicle's style, purpose and appearance.

Asterope GTAVpc Engine

An Inline 4 engine appearing in an Asterope. The Inlet Manifold can be seen on the left, bearing 4 pipes, and the Exhaust manifold can be seen on the right, bearing 4 pipes as well. 2 exposed timing blue gears with a shared twin-cam-timing belt can be seen. This makes it DOHC", as two camshafts are seen on the single-bank of cylinders.

3D Universe

  • V12
  • Inline
  • V
  • Inline 5

HD Universe

Cheetah GTAVpc Engine

A V8 engine appearing in a Cheetah. The camshaft/engine covers can be seen in black "lung" shapes. Identification can be done by counting the number of exhaust pipes on the manifolds (in silver, 2 sets of 4 in total), 4 on each side makes this engine a V8. The engine exhausts finalize by entering a large muffled-exhaust chamber.

Appearing as Engine Covers
  • Inline 4 (also known as Straight 4 or 4 cylinder.)
  • V8 (also known as 8 cylinder.)
  • Inline 6 (also known as straight 6 or 6 cylinder. Not to be confused with V6.)
  • V6 (also known as 6 cylinder. Not to be confused with Inline 6.) - Cover Only
  • W16 (Adder only, also known as 16 cylinder.) - Cover Only
Appearing as 3D Models
  • Inline 4 (most common)
  • V8
  • Inline 6
  • 3 cylinder (Panto only)
  • V4 (Bifta only)
  • V12

Engine Layouts

PoliceTransporter-GTAV-Engine

A transversely laid straight 4 engine found in the Police Transporter.

Transversely laid engines - Engine is laid across the car; sideways (aka East-West). Examples include:

Grand Theft Auto V

Longitudinally laid engines - Engine is laid down the car length-ways (aka North-South). Examples include:

  • Almost all cars in the game.

Vehicle Engine 3D Models

Grand Theft Auto IV

Twin Cylinder Inline-4 V8
Other Unknown Model-Less

Grand Theft Auto V

Single Cylinder Twin Cylinder Inline-4
Inline-6 V8 V12
Other Unknown Model-Less

Engine Features

Air Filters

Vigero-GTAV-V8-Air filter

A V8 engine with a large air filter centralized on the engine.

Air Filters are devices used to filter air before it is drawn into the engine. Although all cars feature air filters, only some vehicles feature external, distinctively large air filters.

Appearing in the HD Universe the most, they are detailed models with typically red filter paper in a usually cylindrical block placed on the top of the engine cover, or, for basic cars, laid aside the engine, in which an air filter pipe will be used for connection.

Examples of cars including air filters are:

Turbochargers

Turbochargers are turbine-driven devices used to gain the highest-potential energy from exhaust air. They appear in the HD Universe the most, as a spiral/helical aluminium model, located beside the engine. The only modeled part of a turbocharger seen in-game is the turbine side housing, appearing as the aforementioned description.

Cars in Grand Theft Auto V can be seen with Turbocharger models by default, however, cars with them will not have any effect on the car's performance unless they purchase a Turbo modification at Los Santos Customs or other mod-shops. Note that cars without turbocharger models by default will not necessarily be fitted with a model even if the turbo modification is purchased.

Examples of cars using turbocharger models are:

Grand Theft Auto V

Note several super cars in GTA V, particularly examples such as the Osiris, Turismo R and Cheetah appear with side-placed Intercoolers, which are devices used commonly on turbocharged vehicles (especially when located behind intakes on the sides of cars), which cool down intake air for the best possible efficiency and performance. This could suggest that the aforementioned super cars are turbocharged, however, no in-game models of turbochargers appear in these vehicles.

Superchargers

Supercharger-Intake-GTAV

A supercharger intake in GTA V.

Superchargers are air compressor devices used to gain larger amounts of torque and energy, thus gaining an extra "boost". It increases the amount of air drawn into the engine by sucking air through a fan in an intake device.

Superchargers are claimed to be on several vehicles in game, evidently from in-game badges and website descriptions, however, the supercharger itself cannot be seen in-game. Despite this, supercharger intakes can be seen on cars, particularly muscle cars, whether using in-game modifications (in GTA V), or as an extra accessory added by default, such as the Dukes in GTA IV. Supercharger intakes can be added to certain cars in GTA V, where they are known as bug-catchers. Supercharger Pulleys can be seen on some cars, such as the Blade in GTA V. Furthermore, badges can be seen on certain cars, defining them as "supercharged". Here lists any in-game evidence suggesting there are Superchargers fitted on cars;

3D Universe

Grand Theft Auto IV

Episodes from Liberty City

Grand Theft Auto V

Engine Parts

Manifolds

Appearing only the HD Universe, manifolds are a set of pipes which allow mixtures of air and fuel to enter and exit the engine. Because of the game limitations/reductions in the past, the manifolds are only present in the HD Universe, and appear as partially-3D Models. In GTA V, manifolds appear in most vehicles, but only a selective few can be seen from the exterior. Those which are not visible can be seen using the Rockstar Editor, supposing the engine actually has the model. For GTA IV and GTA V, manifolds are currently the best way to identify the type of engine, as the engine textures in the HD Universe are still contradictory and not detailed enough to fully identify an engine, leaving the amount/positioning of manifolds as a good technique for identifying the engine.

Camshafts/Cam Covers

Camshafts are a main feature of an engine which are designed to let in a correctly timed release of air and fuel into the cylinders. While the camshaft itself is not visible, the cam/camshaft covers, rocker covers and valve covers are. They are prominently featured in all the games, but detail is limited in the 3D Universe. Timing Belts (or timing chain) are seen on some models of V8 and Inline 4 engines, such as in the Blade and Youga. When a piston moves, it rotates the crankshaft which then rotates the camshaft. The Timing belt is the chain or rubber belt that connects the crankshaft to the camshaft. In other words, the movement of timing belt is effectively responsible for the movement of camshaft.

Currently, camshaft appears as in-game detail, as Single Overhead Camshaft (SOHC) (on both Inline engines and V engines), and Double Overehad Camshaft (DOHC) (on Inline engines only).

Fuel Intake/Injection

Carburetors (or Carburettors) are devices used to blend a mixture of fuel and air before its input into the engine.


Typically, carbs appear on older style engines, in a down-draft style, which can be seen on the Stinger GT, Stirling GT, JB 700 and Z-Type. Note that these do, however, share the same model as what would be throttle bodes, such as those found on the Futo and Brioso R/A.

In reality, carbs, particularly downdraft carbs, are dangerous for intake of foliage and debris, however, in-game, carburetors pose no threat nor affect performance.

The Fränken Stange features unique velocity stack carburetors; where the Carburetors are significantly taller and feature large curved cylindrical intakes. The exact same velocity stacks can be applied to the Roosevelt Valor, which is technically incorrect, as the number of stacks (8) does not correspond to the number of cylinders (12).

Similarly-looking, Throttle Bodies are another device fitted on cars which regulate the amount of air flowing into the engine, in response the engine control unit then injects more or less fuel. Unlike carbs, throttle bodies do not feature the fuel bowl, as they do not control fuel ratios. In-game, they use the same model as the down-draft carburetors, as well as a small cuboid model used from the main engine block, finally followed by the original 4 inlets on the inlet manifold.

Due to the nature of the texture, it is almost impossible to differentiate between what are carburettors and what are throttle bodies in-game (with the exception of real-life instinct that throttle bodies are typically modern-used unlike carbs), thus it can be said engines with said parts are either/or, rather than just one.

Engine Oil

OilGauge-GTAV-Cars

Oil Gauges and Lights functioning on the dashboard in GTA V (enhanced version only)

Oil can be seen present in GTA V. When the engine is heavily damaged, oil can be seen dropping from the engine bay. Heavily damaging the engine bay will eventually cause a large amount of oil leaking expeditiously. The oil gauge can also be seen functional inside some cars (enhanced version only). It measures oil temperature rather than pressure. When stationary, the gauge will increase, and when moving, the gauge will decrease. When the engine bay is heavily damaged, a "Low Oil" warning light will appear, shortly before the engine cuts off.

Engine Modifications

In Grand Theft Auto V, various engine modifications are obtainable. They can be unlocked and fitted at Los Santos Customs and Beeker's Garage (and Benny's Original Motor Works in the enhanced version of Grand Theft Auto Online).

The engine modifications are listed in Engine Management Systems (EMS) upgrade levels, from Level 1 to Level 4. EMS modifications in GTA V increase acceleration, and cost amounts from $9,000 to around $40,000.

Turbo tuning is also available, which presumably adds a turbocharger and/or improves upon its intake rate, albeit with high prices ranging from $25,000 to $50,000. Similar to EMS upgrades, Turbo tuning increases acceleration, however, at a much higher rate, balanced with its higher cost. Turbo modifications also add the sound of a dump valve (blow-off valve) when gear shifting, most commonly up, or when letting off the throttle at high speeds. 

In the enhanced version of Grand Theft Auto Online, exclusively at Benny's Original Motor Works, engine block modifications can be added, such as adding custom air filters, intakes, carburetors/throttle bodies and covers.

Engine Displacement

Displacement is the volume inside a cylinder which the piston revolves within. It is commonly measured in either "cc" (Cubic Centimeters), or Liters, where 3000cc would equal 3 Liters. Note that displacement must not be confused with the fuel tank volume.

Some cars, especially in GTA V, have displacements mentioned on either their in-game website appearance, or on the vehicle itself (for example, badges on the Blista Compact).

Defined Displacements

Grand Theft Auto V

Note: After the Further Adventures in Finance and Felony update for the enhanced version of GTA V, all website displacements, horsepower and engine definitions were removed.
Vehicle Displacement Accompanied Engine (Stated) Accompanied Engine (In-Game Model)
Blista Compact 1.4L N/A Inline-4
Brawler 5L V8 Inline-6
Chino 7.6L V8
Coquette BlackFin 5.4L V8 V8
T20 4L V8 V8
Vindicator 0.62L V-Twin v-Twin
Osiris 6L V12 V8
Stirling GT 3L V8 V8
Virgo 5.4L V8 V8
Windsor 6.6L V12
Casco 3.6L N/A V8
Lectro 1.1L N/A
Furore GT 4L N/A Inline-4
Coquette Classic 7L V8
Thrust 0.9L N/A
Massacro 6L V6 Inline-4
Zentorno 6.8L V12 N/A
Huntley S 4.2L V6 Inline-4
Jester 4L V6 V8
Turismo R 7.2L V12 V8
Alpha 4.3L V8
Khamelion 2L N/A Inline-4
Hotknife 4L N/A V8
Carbon RS 1L N/A
Elegy RH8 3L N/A
Z-Type 3.4L N/A V12
Stinger 3L N/A V8
Stinger GT 3L N/A V8
JB 700 4L N/A V12
Cheetah 6L N/A V8
Entity XF 4.5L N/A NA
Adder 8L N/A N/A
Monroe 3.7L N/A
Cognoscenti Cabrio 5.8L N/A
Vacca 5.1L N/A N/A
Bullet 6L N/A N/A
Carbonizzare 5L N/A Inline-4
Coquette 6L N/A Inline-4
Exemplar 6L N/A
Feltzer 6L N/A
Infernus 6L N/A N/A
9F 4L N/A N/A
Rapid GT 4L N/A
Super Diamond 7L N/A
Voltic Battery Lithium Ion Battery
Comet 3L N/A V8
Surano 6L N/A
Banshee 8.4L N/A V8
Dukes 6.8L V8 V8

Image Gallery

3D Universe

HD Universe

Trivia

Grand Theft Auto IV

  • Engines tend to have different sound pitches on different occassions, mostly between loaded svaegames. This feature is noticeable on vehicles with loud engine sounds, such as the Schafter, the Intruder or the FIB Buffalo.
  • When damaged enough, while the majority of the cars only emits a higher sound pitch when stationary, others will have a noisy crankshaft sound while driving. Vehicles like the Police Cruiser will have this.
    • Beater cars like the Emperor will have this feature too, no matter if it is damaged or not.
  • By turning off the engine, one can eliminate the car's noise and reduce the obstructive smoke if damaged enough.

Grand Theft Auto V

  • Many Rocker covers, such as those on the Brioso R/A or the Boxville will have a Rockstar logo printed on the oil caps.
  • Using the Rockstar Editor for the enhanced version of Grand Theft Auto V, the player can view the entire model of the engines found in cars, and can see visual features not normally visible from the exterior. Note: these 3D models sometimes seem to contradict what the engine appears to be from the exterior.
  • While the cylinder and piston cannot be seen in the in-game models, a Piston can be added as a column shifter gear-stick in Benny's Original Motor Works (enhanced version only).
  • Strangely, when the supercharger intake (named bug-catchers in-game) is fitted to certain cars, like the Dukes and Blade, the supercharger pulley connecting the supercharger to the camshafts will never be fully complete, and will be misplaced and misaligned. This is likely a developer oversight.
  • Likely a developer oversight, both the Warrener and Sultan's straight-6 engine have 6 inlet pipes but only 5 exhaust pipes on their respective manifolds.
  • The Fränken Stange is the first car in the Grand Theft Auto series to feature external "trumpet" velocity stack carburetors; tall cylindrical stacks posing as intake manifolds located on top of the engine block.
  • As of the January 2016 Update for GTA Online, the Sultan RS can have its cambelt cover removed, exposing its camshaft pulleys and sprockets, known as verniers, as well as changing the colour of the cambelt cover. The valve covers can also be changed on both this car and the Banshee 900R.
  • Although alternators can be seen on the base textures of the engine bay, all alternators are facing the wrong way, and do not feature any form of connection to the engine.
  • As of the Bikers update, cars with exposed engines, such as the Fränken Stange and upcoming Tornado Rat Rod have rotating cogs on the engine block, as well as bikes with exposed primary drives (Rat Bike, Wolfsbane, Chimera, etc). These also speed up when accelerating. Connecting a supercharger to the engine block also extends a supercharger pulley and belt onto the rest of the cogs.

Also on Fandom

Random Wiki